Deleting sound in CP

Oslo · Occasional Visitor Joined: Mar 09, 2004 Posts: 14

By mistake, I put a warning sound on a McDonald's POI's. I'm not a McDonald-fan, so I do not need to be alerted by voice. Therefore I like to delete this sound, but when I get into the "First warning"-tab. there are no way to delete the "Sound to play as first warning" Rolling Eyes

or?

DinAlt · Posted: Fri Mar 12, 2004 4:32 pm Post subject:

Hi,

If you don't want to be informed of Macdonalds you can either delete the overlay file from your PDA or if you still want to keep the overlay but don't want a warning click on the checkpoint icon, select overlay settings then highlight the overlay file for McD and select properties - first tab is detection - remove the tick in the "Detect PoI's from this overlay box" and it won't pick them up.

If your PDA isn't showing checkboxes do a soft reset first and this should make them appear. this should also allow you to clear the check box in the first warning section if you still want a visual notification of a McD but no voice.

Hope this helps,

DinAlt

Oslo · Occasional Visitor Joined: Mar 09, 2004 Posts: 14

Thank you, DinAlt. But are there no way just to delete the Sound, and keep the CP POI pop-up? (McD is not important here, just used it as an example).

DinAlt · Posted: Fri Mar 12, 2004 11:53 pm Post subject:

Hi again,

Just go to the properties section for the overlay you want and uncheck the boxes with first and last warning in them - ths will keep the pop up but will give no sound.

(I mentioned this at teh end of my last post).

DinAlt

Oslo · Occasional Visitor Joined: Mar 09, 2004 Posts: 14

Thank you. I observed that after answering Embarassed

	PocketGPS
	Web