PocketStreets & Sysonchip ports ?

HungryHaggis · Occasional Visitor Joined: Apr 03, 2004 Posts: 9

I have a Sysonchip CF card. The Leadtek software finds it OK and recognises the NMEA signals etc so I know the card works. I am using with on only Jornada 545 and the allocated port is "Port2"

When I open PocketStreets it shows ports 1,3 and 4.....but no Port 2.

Any ideas where I am going wrong here ?.

lbendlin · Posted: Fri Apr 23, 2004 9:00 pm Post subject:

what version of PocketStreets are you using?
_________________
Lutz

Report Map Errors here:
TomTom/TeleAtlas NAVTEQ

HungryHaggis · Occasional Visitor Joined: Apr 03, 2004 Posts: 9

PocketStreets 2002, SR1 (09.05) (08.0902)

lbendlin · Posted: Sat Apr 24, 2004 5:33 pm Post subject:

That's an old version. You need to use version 11.00(18.0200) - it supports more COM ports
_________________
Lutz

Report Map Errors here:
TomTom/TeleAtlas NAVTEQ

HungryHaggis · Occasional Visitor Joined: Apr 03, 2004 Posts: 9

Thanks - but this doesn't solve the problem.
I am now on the version of PocketStreets that you mentioned. When I start the Pocket PC (a Jornada 545) I open the Leadtek s/ware and select Port 2 - this opens the Sysonchip card and starts receiving signals (all Leadtek screens show that I am receiving signals and can see satelites).
When I then go into PocketStreets and select "GPS", I only get the option to use Ports 1,3 or 4....port 2 is not in the list.

Any ideas please ????? Confused

HungryHaggis · Occasional Visitor Joined: Apr 03, 2004 Posts: 9

Some additional information........

When I have the Leadtek software active in the background (ie on Port 2) the CPS card is also active and giving the Leadtek s/ware data to determine the current position. When I exist the Leadtek s/ware it obviously colses the communication to the card and the card is turned off.

In Pocket Streets, when the Leadtek software is running in the background using port 2 then this port id not displayed in the Pocket Street lists (ie I Pocket Streets only offers ports 1,3 and 4). If I first trun off the Leadtek s/ware then Pocket Streets offers ports 1,2,3 and 4 however when I select port 2 the card is obviously turned off so I don't get any signal.......

I appear to get the same behaviour on a new iPaq2210 that I have if I more the card over to this machine.

Confused..... oh Yes !

	PocketGPS
	Web