bt receiver won`t switch off

[islander]

After 18 months reliable service, my bluetooth receiver won`t switch off.The blue light keeps on flashing no matter how long I depresss the on/off button for.It is the one I with my satnav kit.It is a tomtom bluetooth
9821x.Is it u/s.If so can anyone recommend a replacement,which ideally uses the same kind of charging lead,and easy to set up.

regards
Bernie

[lbendlin]

The Globalsat BT338 has the same connector.
_________________
Lutz

Report Map Errors here:
TomTom/TeleAtlas NAVTEQ

[islander]

further to original post,strange things are happening with receiver.I managed to get it to switch off,and on.It will only pick up satellite information when disconnected from the power supply from the seidio holder.As soon as you connect the power lead it loses signal on the sats ( as observed by looking at status page on ttnav 5). Apparently the receiver was making a buzzing noise when my wife was using it in the car (connected to power).
I measured the output voltage from the power lead,and it was 5.3 volts,which seems normal.

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!