tom tom go 500 what v?

[rayrayy0]

hi,ive just bought a tom tom go 500.ive looked in the menus and from what i can make out my app is 5.201[5252/050628]05.908.its 30mb ram. gps v1.21.boot 2.18 and plus mapv571device ak85n b2dua.so what version is mine CAN SOMEBODY PLEASE HELP ME.I WANT TO INSTALL THE SPEED CAMERAS.my pc doesnt have the card reader slots but it has plenty of usbs.

[Unplugged]

Yuo will need to purchase either a card reader or use the lead that came supplied with your go.

[Privateer]

Hi rayrayy0,

to the forum!

All versions of TomTom are able to display the PocketGPSWorld camera database. If you want to install the POI Capture utility (only used for recording cameras and not detecting them) then you need specific versions, which are documented on the POI Capture web page.

There are some guides that should be read (in the following order):

The beginner’s guide to the PocketGPSWorld camera database.
This explains about the different camera types and about categories and subcategories, so that you can decide how you want the database on your unit.

Depending on whether you have TomTom Navigator on a Pocket PC or TomTom GO, please read either:

How to install (camera database) POIs to TomTom Navigator 5.
This guide explains how to load the PocketGPSWorld camera database onto a Pocket PC running TomTom Navigator 5.

How to install (camera database) POIs onto a TomTom GO, Rider, or One.
This guide explains how to load the PocketGPSWorld camera database onto your TomTom GO, Rider, or One.

Once you have installed, set up, and used the PocketGPSWorld camera database for a while on your TomTom SatNav system. You may want to share and send in details of cameras yourself. You can do this by using the PocketGPSWorld POI Capture utility:

The PocketGPSWorld POI Capture utility.
You do not need the PocketGPSWorld POI Capture utility on your TomTom SatNav system in order to use the PocketGPSWorld camera database. However if you want to send in camera details then POI Capture makes the process of recording cameras much easier on TomTom Navigator and GO (original, 300, 500, and 700). At the moment POI Capture will not work with TomTom Rider, One, and mobile. This is for a technical reason, which we hope, will soon be rectified by TomTom.

The above guides may look lengthy and complicated when first seen. However if you grab a cup of coffee and read each one thoroughly then they should make sense as they have been written in a step-by-step way, for ease of reading.

Regards,
_________________
Robert.
iPhone 6s Plus, iOS 14.0.1: iOS CamerAlert v2.0.7
TomTom GO Mobile iOS 2.3.1; TomTom (UK & ROI and Europe) iOS apps v1.29
Garmin Camper 770 LMT-D

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!