Problem installing Speed Camera POIs

MJC · Occasional Visitor Joined: Aug 25, 2005 Posts: 2

I have a problem installing the speed camera POIs in that they don't seem to want to co-exist with each other. eg. when I copy all the gatso zone files, they show up ok, eg. gatso_20, gatso_30... etc. But when I then add all the mobile_30, mobile_40... etc files - some or all of the gatso files no longer show up in the POI list. And vice-versa.

Has anyone else experienced similar symptoms, or have any idea of what's happening?

Thanks.

Privateer · Posted: Thu Aug 25, 2005 12:21 pm Post subject:

Hi MJC,

to the forum! Thumbs Up

How many POIs have you got loaded on your GO? If you're running version 5.201 then the maximum number of POI categories is 27.

For further information, there are some guides that should be read (in the following order):

The beginner’s guide to the PocketGPSWorld camera database.
This explains about the different camera types and about categories and subcategories, so that you can decide how you want the database on your unit.

Depending on whether you have TomTom Navigator on a Pocket PC or TomTom GO, please read either:

How to install (camera database) POIs to TomTom Navigator 5.
This guide explains how to load the PocketGPSWorld camera database onto a Pocket PC running TomTom Navigator 5.

How to install (camera database) POIs onto a TomTom GO.
This guide explains how to load the PocketGPSWorld camera database onto your TomTom GO.

The above guides may look lengthy and complicated when first seen. However if you grab a cup of coffee and read each one thoroughly then they should make sense as they have been written in a step-by-step way, for ease of reading.

Regards,
_________________
Robert.
iPhone 6s Plus, iOS 14.0.1: iOS CamerAlert v2.0.7
TomTom GO Mobile iOS 2.3.1; TomTom (UK & ROI and Europe) iOS apps v1.29
Garmin Camper 770 LMT-D

MJC · Occasional Visitor Joined: Aug 25, 2005 Posts: 2

Thanks Robert.

I do have a lot of POIs installed on the card, and I did wonder whether this was the problem. However, as I understand it, I should still be able to see all the POIs I have on the card displayed in the POI list, even if I am not able to 'enable' them all... is this correct? What I am experiencing is that the camera POIs are not showing up at all in the POI list.

Oldboy · Posted: Thu Aug 25, 2005 5:35 pm Post subject:

	PocketGPS
	Web