2210 and ttm3.02/3

gogo3 · Occasional Visitor Joined: Oct 07, 2003 Posts: 21

I am suffering the same problems of loss of Bluetooth etc..
I think I can get it back on track but don't know how to do a 'hard' reset.
Can anyone help.

nej · Posted: Thu Oct 07, 2004 2:15 pm Post subject:

To hard rest a 2210:

With 1st hand hold down far left hand button on the front
With 2nd hand hold down far right hand button on the front
With 3rd hand :D stick the stylus in the soft-reset hole at the back and hold it there. The screen will kind of fade out. Push the reset button again and it will come back on, completely reset.

gogo3 · Occasional Visitor Joined: Oct 07, 2003 Posts: 21

Thank you nej I'll get in training!!

If you hard reset what does in fact do? Do you lose date/progs?

Thanks

nej · Posted: Thu Oct 07, 2004 3:42 pm Post subject:

You lose everything - all programs and data, except what is stored on your storage (SD & CF) cards and what is in the IPAQ File Store.

That said, if you have software installed to the SD card, it will still need re-installing as all the associated registry entries etc will have gone.

gogo3 · Occasional Visitor Joined: Oct 07, 2003 Posts: 21

A hard reset seems a fairly drastic action.

The problem is that all sound has 'disappeared' from TmTm. I have checked 'File\properties\. The Voice Instructions box is ticked but no sound when I TEST'. Sound is on in Navigator.

If I try to 'Demonstrate Route' I get the message Unable to start demonstration (2).

Would be most grateful for any ideas.

nej · Posted: Fri Oct 08, 2004 11:55 am Post subject:

I would suggest do a soft reset (by sticking the stylus in the hole in the back). If it's still bad, then try re-installing TomTom.

	PocketGPS
	Web