Ipaq ROM Update & Activation Codes

[technik21]

Hi

Before I go ahead and update my iPaq 1940 Rom to ver 1.10, does anybody know if by updating the ROM, the Ttn3 activation codes will be accepted again?

I presume it should be ok to re install Ttn3, as the hardware ID will not change, and the activation process will accept the new ROM version.

I understand that by doing the ROM update, all addtional programs and data are lost in the process, so I will need to reinstall Ttn3 & maps.
I last installed them about 3 weeks ago. According to TT's website, the original activation codes submitted after 7 days, will not be accepted on a "New or Replacement PDA" untill after 6 months from activating.

I don't think this would apply to me though.

Any confirmation \ help would be welcome.

Thanks!!

[iancjc]

You should have no problems - either the program will do the activation automatically or you will have to go to ttcode web site - either way it will accept that it is the same ipaq.

good luck

Ian
_________________
-----------------------------------------------------------
TyTn II (WM6.1) / tomtom one v2
TTN6.03 tomtom 7.xx (one)

[Darren]

The unit's hardware ID which TT use for the activation process will not change following a ROM upgrade (although for HP Jornada's this was not always the case!) and so you will not have any problem re-activating
_________________
Darren Griffin

[technik21]

Thanks guys for your help.

Much appreciated!! :D

[joejoe123]

I hope you did not upgrade yet to this version because this version has a lot of troubles and might destroy your pocket pc .

[Robin2]

When I upgraded the ROM, I re-installed TomTom and did not have to activate it - it worked straight away
Robin

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!