Garmin POI Loader - Using through Europe

[richie771]

Good Evening all,

I am racking my brains on this.

I live in Germany (UK Forces)

I use the Europe speed camera DB (.CSV) all works fine.

I have uploaded the UK cameras but have the 19mph problem (well documented).

Has anybody a work around so i can upload the euro cameras using POI loader (KMH setting) then upload the uk cameras (MPH setting).

Most will be aware that as soon as I upload the second file it wipes out the 1st.

Can I manually adjust the uk .csv file to change from 30mph to 50kmh which should show as 30mph when in UK? a theory only!

Your advise would be appreciated.

Richie
Nuvi 660

[mikealder]

Richie, have a read through This Thread which should give you the answer to the problem - Mike

[richie771]

Works a treat! Thank you very much.

I did not use the SD card, I attached the unit direct via USB and ammended the file name within the Nuvi.

I now have EU_poi.gpi and UK_poi.gpi

Alles Gut.

Thanks again, great forum as always.

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!