Fugawi UK 2 on Ique3000

[iQue3000user]

Having recently changed from an old Palm M515 with Magellan GPS Backpack to a new IQue 3000 I am having trouble getting fugawi to see the in-built GPS. Fugawi is otherwise installed and working ok on the new IQue.

I am running Fugawi UK Version 2 on the PC (latest update = .1049)
On the IQue it is showing as Fugawi for Palm v 02.01.02

GPS on the Ique works fine with built in QNav software and with cachemate / cachenav but Fugawi simply will not connect.

On the M515 I had com port numbers listed under "port number" options under GPS Prefs menu but on the IQue these are replaced by "Cradle, IR, Console, Cradle232 and CradleUSB"

It defaults to Cradle with a baud rate of 4800 which I think should be the correct settings.

I have tried opening and closing the ports and selecting other ports and baud rate combinations but whatever I try results in the sky info window being completely empty. No satellites listed and no big circle to represent the horizon.

I have tried uninstall - reinstall in case software was at fault but same problem occurs.

Any idea what the correct baud and port settings should be and what else i can do to get the GPS to talk to fugawi ?

Thanks

[alix776]

you need to select pocketpc not palm
_________________
currently using aponia truck navigation on windows phone. Good bye IOS don't let the door hit you on the way out .

Oh the joys of being a courier.
device Lumia 950 xl

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!