Tom Tom Navigator w/ CoPilot Jacket

[fatone]

I had CoPilot 4 on my IPAQ 3870, and then switched to Navigator 2004 cause of the features. It was working fine and I even took it to Europe and used it over there. Around July 05, my battery went completely dead and I lost all my apps/data and reinstalled Navigator 2004. I cannot get the CoPilot Jacket receiver to get a fix on any satellites. I check the GPS Status and I don't see any satellites at all. The dots are moving from the GPS status page. This problem started occurring after I didn't use the GPS for about 3 months. I have done all the things, such as soft reset, reinstall product, make sure I have a clear view of the sky, etc. I have left it in the car for about 3 hours. Like I said before, this was working fine in the same car same jacket, same windows software, same windows mobile software. I used a program called GPS Viewer made by HOLUX to check to see if the GPS receiver is sending/receiving data and it is.

This is what I see:

[lbendlin]

The GSV sequence is missing. You may want to reprogram the receiver to

RMC 1
GSA 1
GSV 5

or see if a factory reset helps
_________________
Lutz

Report Map Errors here:
TomTom/TeleAtlas NAVTEQ

[fatone]

I did that to no avail. The settings I have under WinFast Navigator are CGA:1 GLL:0, GSA:1 (used to be 5 before change), GSV:5, RMC:1, VTG:1, MSS:0, User:0, User:0, User:0

The only program I have to change these values in WinFast Navigator, but I don't see any NMEA data. I get the data out of Holux's GPS Viewer, but cannot change these values in there. Is there another program that I should be using to configure the GPS receiver?
_________________
IPAQ 3870 running Windows Media 2003, Pocket CoPilot 4, using the CoPilot GPS Jacket model D15A8

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!