NAVMAN 4100 WITH TOMTOM

LISA · Occasional Visitor Joined: May 19, 2004 Posts: 3

Hello,

I bought a GPS NAVMAN 4100 BT with TOMTOM3 but I didn't find my model of GPS in the list that TomTom3 support. If anyone could help me I would appreciate :D

Regards

Darren · Posted: Wed May 19, 2004 7:49 pm Post subject:

Try NMEA 0183v2 4800 and the correct BT Com Port and you will be fine Thumbs Up

_________________
Darren Griffin

LISA · Occasional Visitor Joined: May 19, 2004 Posts: 3

Genie · Posted: Wed May 19, 2004 9:06 pm Post subject:

I run mine using NMEA 0183v2 57600 with no problems.
_________________
Ipaq 4150, Polstar PBT-111, TomTom3, Kingston 256mb SD, Arkon Powered Amplified PDA Mount

icsys · Posted: Thu May 20, 2004 12:22 am Post subject:

The 4100 communicates at 57,600 baud so that would be the optimum setting to use.
_________________
Ian.
iPAQ 2210 | Navman 4100 BT Receiver
Navman iCN 635
TomTom GO
Anquet OS mapping

LISA · Occasional Visitor Joined: May 19, 2004 Posts: 3

Hello again,

Thank you for your informations :D

I put the settings with 0183v2 4800. It works fine yesterday. But today it doesn't detect the GPS. I do not understand. I didn't change any settings. I don't know what's going on?

Regards Smile

Lisa from Paris

Genie · Posted: Thu May 20, 2004 10:36 am Post subject:

Before starting TomTmo, ensure the bluetooth is enabled. Then turn on the 4100 and start TomTom.

Go to the GPS settings and ensure the NMEA 0183v2 57600 is selected along with the correct com port for bluetooth.

ensure the box on the left of the dropdown is ticked and wasit a bit, you should start to get a connection to the gps receiver.
_________________
Ipaq 4150, Polstar PBT-111, TomTom3, Kingston 256mb SD, Arkon Powered Amplified PDA Mount

	PocketGPS
	Web