View previous topic :: View next topic |
Author |
Message |
jasuk70 Occasional Visitor
Joined: May 17, 2004 Posts: 33 Location: Hemel Hempstead
|
Posted: Tue May 18, 2004 5:37 pm Post subject: Transferring from Pocket CoPilot 4 to TomTom Navigator 3 |
|
|
After a disastrous attempt at navigating in London last weekend, I finally had enough to PCP4. I have now ordered TomTom Nav 3 from their online shop and am wondering if anyone else has the Pocket PCP jacket working with the TomTom 3 software. (It’s the one with the aerial point out backwards and onboard battery plus external aerial connection, not the original jacket.)
Also are there people here who have moved over to TTN 3 with any advice on using the new software compared to the old?
BTW The main reason for moving is the lack of help or interest from the people I bought the upgrades from (Team Warrior) and it also looks like there isn't going to be proper traffic integration with PCP in the UK for a while.
Jas
p.s. How long does TomTom usually take to ship to the UK? |
|
Back to top |
|
|
lbendlin Pocket GPS Staff
Joined: 02/11/2002 22:41:59 Posts: 11878 Location: Massachusetts, USA
|
Posted: Tue May 18, 2004 6:50 pm Post subject: |
|
|
The jacket is exposing a standard COM port (COM4) so it is easy to use with TomTom (v2 or v3). I have to disappoint you though - the jacket does not have it's own battery... But the chipset on the GPS is low power, so it doesn't drain the PocketPC battery that much. (Anyhow it is always a good idea to have an extra battery pack handy, or an external power pack, or a solar battery) _________________ Lutz
Report Map Errors here:
TomTom/TeleAtlas NAVTEQ |
|
Back to top |
|
|
jasuk70 Occasional Visitor
Joined: May 17, 2004 Posts: 33 Location: Hemel Hempstead
|
Posted: Wed May 19, 2004 1:25 pm Post subject: |
|
|
Cheers for that.
The info I got from the Team Warrior email was the following:
Faster and better GPS reception (up to 8 times quicker than the NAVMAN jacket)
A vent mounting provides a secure fitting to the dashboard with a clear, safer view of the road ahead
A single integrated power socket means you can get rid of the power connector
****
An internal battery helps remember your current location, even when your iPAQ is switched off, for faster GPS reception
****
An optional external antenna gives an even better reception in the car and solves the problem of GPS reception through heat-reflecting windscreens
The bit betweem the **** was what I was on about. But I've been wondering why it nerver made any difference in aquaisition time.
Jas |
|
Back to top |
|
|
lbendlin Pocket GPS Staff
Joined: 02/11/2002 22:41:59 Posts: 11878 Location: Massachusetts, USA
|
Posted: Wed May 19, 2004 1:48 pm Post subject: |
|
|
Ah, that - that's merely a (small) buffer battery for the GPS receiver itself that holds the almanac and ephemeris data for a while. This little battery is not connecting back to the iPAQ and doesn't contribute to the overall energy balance.
Acquisition should be in the sub-40 seconds range once you had a fix at roughly the same position. The antenna shoud ideally face skywards with no obstructions. If you use it inside a car you may have problems with tinted windshields - make a test of acquiring a fix inside the car and outside and compare the number of sats and the strength.
You can use Crux_View to manipulate the settings of the jacket. Trickle mode, EGNOS, etc. _________________ Lutz
Report Map Errors here:
TomTom/TeleAtlas NAVTEQ |
|
Back to top |
|
|
|
Posted: Today Post subject: Pocket GPS Advertising |
|
|
We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?. Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!
|
|
Back to top |
|
|
|