View previous topic :: View next topic |
Author |
Message |
spagbog Occasional Visitor
Joined: Aug 14, 2006 Posts: 9
|
Posted: Thu Aug 17, 2006 9:47 am Post subject: pre-loaded poi's vanished after a reset, plz help |
|
|
Hi,
I really want to enjoy my new i3, but its starting to fraustrate me now.
I was thinking about installing camera database, need to buy a card reader and bigger card than a 256 mg to have MaFt site poi's as well?
A new problem came up yesterday with the screen getting stuck for 30 sec- 1min quite frequently even tho the text directions were still displayed and changing, also my speed was accurate. The last thing i had done to it was load poi's from MaFt site. I did these manualy so i could be alerted to mountains and castles. As with most new toys i've been pressing buttons and experimenting so i thought maybe a reset might help.
After reseting, "food hotels and more" are now empty!, my customs points are still there. The pre-programmed poi's were exellent and now they have all gone.
I understand that i might have to leave unit out in the car for a while now that i reset it, will these original poi's come back??
All i wanted was a satnav, not a headache , i simply want it to
a) animate smoothly withouth frequently sticking ( first couple of days was fine)
b) display poi's from MaFt site in map mode, but no bong
c) alert me of speed cameras with bong
Think im regreting this purchase, please put me out of my misery somebody as i cant read anymore threads. getting square eyes. Thankyou.
p.s. is the sticking screen to do with 3.10 firmware?
I have City Nav Europe NT+ V8 |
|
Back to top |
|
|
sanaar Occasional Visitor
Joined: Mar 27, 2006 Posts: 53
|
Posted: Thu Aug 17, 2006 3:19 pm Post subject: |
|
|
Roll back to ver 2.7 to sort out 99% of your problems |
|
Back to top |
|
|
spagbog Occasional Visitor
Joined: Aug 14, 2006 Posts: 9
|
Posted: Thu Aug 17, 2006 6:42 pm Post subject: |
|
|
Thanks, any more help out there? Might have to talk to Garmin, if they aren't helpful then its going back. This site seems to be the only help and information source for this unit. Garmin should have their own :x |
|
Back to top |
|
|
PaulB2005 Pocket GPS Moderator
Joined: Jan 04, 2006 Posts: 9323 Location: Durham, UK
|
Posted: Thu Aug 17, 2006 7:22 pm Post subject: |
|
|
Did you try Firmware 2.7? I'm still using 2.7 because each version after that has all sorts of lock up and lagging problems. |
|
Back to top |
|
|
spagbog Occasional Visitor
Joined: Aug 14, 2006 Posts: 9
|
Posted: Fri Aug 18, 2006 1:43 am Post subject: |
|
|
Hello again,
To my relief the internal poi's came back! :D
And there was no sticking either after 6 hours of driving.
Ok, getting better. But... the only icon (poi) that was displayed in map mode was "my home", none of the others showed ("food, hotels ect" or "custom points) no matter how close i was to them. I regularly drive past tesco and waitrose which show in custom points but not on the map unless i select "show map". I guess i would have the same problem with cameras when i get round to them too.
Is my unit defective or is there something i have overlooked?
Thanks for info, probably been covered but i dont have time to go through every single thread on the i3. |
|
Back to top |
|
|
spagbog Occasional Visitor
Joined: Aug 14, 2006 Posts: 9
|
Posted: Fri Aug 18, 2006 1:56 am Post subject: |
|
|
Forgot to mention that i left the 3.10 version on as i am reluctant to roll back 4 versions. I find it difficult to understand that all 4 updates are more unstable than 2.7, we're not talking about pc software that has many implications but a unit that has few functions and simple poi's simple to manage. How could they get it so wrong with the "improved" versions??
Anyway fingers crossed and hope i get it sorted
Still open to ideas about the poi displays |
|
Back to top |
|
|
sanaar Occasional Visitor
Joined: Mar 27, 2006 Posts: 53
|
Posted: Fri Aug 18, 2006 7:27 am Post subject: |
|
|
Dont take this the wrong way, but you are a newcomer to the forum.
Listen to other peoples experiences.
I assure you ver 2.7 is the most stable and Garmin HAVE got it wrong with
their supposed updates in versions.
As for the POIs, this is normal.
You wouldnt want the unit bonging its head off at every POI you approached.
Have a read at the threads re other peoples comments re software version number. _________________ garmin nuvi 250
garmin i3 ver2.7
city navigator v8 (indexed and routeable)
city navigator v9 (indexed and routeable
metroguide north america v6(indexed and routeable) |
|
Back to top |
|
|
PaulB2005 Pocket GPS Moderator
Joined: Jan 04, 2006 Posts: 9323 Location: Durham, UK
|
|
Back to top |
|
|
PaulB2005 Pocket GPS Moderator
Joined: Jan 04, 2006 Posts: 9323 Location: Durham, UK
|
Posted: Fri Aug 18, 2006 9:19 am Post subject: |
|
|
Oh and unless you specify Proximity Alerts in POILoader for the POIs they only show if you set them as a Destination or Via Point. |
|
Back to top |
|
|
|
Posted: Today Post subject: Pocket GPS Advertising |
|
|
We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?. Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!
|
|
Back to top |
|
|
|