| View previous topic :: View next topic |
| Author |
Message |
Maymo
Occasional Visitor
Joined: Jun 09, 2005
Posts: 8
|
 Posted: Mon Jan 21, 2008 3:57 pm Post subject: Can't upload database- help |
 |
|
Am I missing something?
I am trying to install the Speed Camera Database on my Garmin Nuvi 370 using POILoader. I tried to use Ash’s Camera Manager v2.5, this seems to work as described in the forum, the POI’s seem to load onto the device, but I can’t see them.
When I test the Nuvi by driving past a speed camera it is not on my map, no warning, no icon, nothing. I have scrolled around the map looking for other cameras that I know of and there is no icon there either. I can see icons for other POI’s that I have loaded eg Aldi, Tesco etc. but not the cameras.
I then downloaded the database manually and installed it using POILoader, the same thing happened, I can’t see the cameras. Which would be the most appropriate version to use, I have tried the POILoader / Speed Zoned Complete.
I have the Garmin Safety Cameras unticked and the Custom POIS ticked and I have Audio Notification single tone ticked.
Help!
Maymo
 |
|
| Back to top |
|
 |
PaulB2005
Pocket GPS Moderator
Joined: Jan 04, 2006
Posts: 9323
Location: Durham, UK
|
| Posted: Mon Jan 21, 2008 5:59 pm Post subject: |
|
|
Is there an option to turn Proximity Alerts on and off?
Also what distances did you use with Ash10 software? |
|
| Back to top |
|
|
Maymo
Occasional Visitor
Joined: Jun 09, 2005
Posts: 8
|
| Posted: Mon Jan 21, 2008 7:17 pm Post subject: |
|
|
| PaulB2005 wrote: | Is there an option to turn Proximity Alerts on and off?
Also what distances did you use with Ash10 software? |
I have gone to Settings, Proximity Points, Alerts, change, and enabled Custom Pois and disabled Garmin Safety Cameras
I used the default distances with Ash10, in fact I used all the default settings
Maymo |
|
| Back to top |
|
|
PaulB2005
Pocket GPS Moderator
Joined: Jan 04, 2006
Posts: 9323
Location: Durham, UK
|
| Posted: Mon Jan 21, 2008 7:26 pm Post subject: |
|
|
When you use POILoader is it set to manual or express?
Really feel like i'm missing something obvious here....  |
|
| Back to top |
|
|
Maymo
Occasional Visitor
Joined: Jun 09, 2005
Posts: 8
|
| Posted: Mon Jan 21, 2008 9:36 pm Post subject: |
|
|
| PaulB2005 wrote: | When you use POILoader is it set to manual or express?
Really feel like i'm missing something obvious here.... |
It's set to express.
I have just sussed out what's wrong. I had left my SD card in the unit every time I uploaded the pois. In POILoader I selected the Garmin unit and not the SDcard but the data seems to have ended up on the card. On startup I got a message asking if I would like the new dada on the card installed to the unit, I clicked yes. This did not work.
I have just tried POILoader again without the card in and the cameras have been installed to the GPS, I can now see the icons for the cameras. Problem solved. I don't know if this has been highlighted before but perhaps a note in the instructions that you must remove the card before loading pois on the Nuvi 370.
Thanks for your help in trying to solve this one 
Regards
Maymo |
|
| Back to top |
|
|
|
![]() Posted: Today Post subject: Pocket GPS Advertising |
|
|
We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?. Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!
|
|
| Back to top |
|
|
|
Forum FAQ
Search
Usergroups
Profile
Log in for private messages
Log in
