serial sync lead for ipaq2110

Googlebot · Posted: Wed Dec 29, 2004 2:06 am Post subject: serial sync lead for ipaq2110

A sort of GPS/PDA question I guess. as I think you can use this cable to get the GPS data out of a roadangel into the PDA

I need to find a sync lead for my iPAQ 2110 (hx2000 series) that plugs into a serial socket. I have heard that soemtime the USB-serial adapters can be a bit funny.

Any help most welcome
:D

lbendlin · Posted: Wed Dec 29, 2004 2:58 am Post subject:

Pin out 22 Pin Cradle Connector iPAQ side.
1 V_ADP
2 V_ADP
3 V_ADP
4 V_ADP
5 Reserved – Do Not Use
6 RS232 DCD
7 RS232 RXD
8 RS232 TXD
9 RS232 DTR
10 GND
11 RS232 DSR
12 RS232 RTS
13 RS232 CTS
14 RS232 RING
15 GND
16 No Connect – Do Not Use
17 USB Detect
18 No Connect – Do Not Use
19 USB – UDC +
20 No Connect – Do Not Use
21 USB – UDC -
22 GND
Shell tied to GND

you only need 7, 8 and 10
_________________
Lutz

Report Map Errors here:
TomTom/TeleAtlas NAVTEQ

DavidW · Posted: Wed Dec 29, 2004 5:07 pm Post subject:

As Lutz says, you just need a cable. A handful of Pocket PCs (mainly some Toshibas) have USB host capabilities rather than a serial port. Your iPAQ has a serial port and no USB host capabilities, so you can't use USB anyway.

You just need a correctly wired serial cable for your iPAQ - the 22 pin wiring is common across all iPAQs apart from the early 3100, 3600 and 3700 series. Not all iPAQs have a serial port, but all the hx2000 series do.

David

	PocketGPS
	Web