Help with BT connection

ROBBINS · Posted: Wed Sep 01, 2004 8:47 pm Post subject: Help with BT connection

Hi all

Can anyone assist with this problem.

I have had to carry out a hard reset and rebuild.

Before the reset, I could start checkpoint, which started the BT connection and TT3 all continously within about 5 seconds. I could then proceed with TT3.

Having done the reset and rebuild, I start checkpoint, Bluetooth Browser now starts, with select a device, and I have to select Holux GR-230, which then starts the BT connection followed by TT3. When I finish TT3 and turn off the 2210, the BT blue light continues to flash, and will only stop if I do a soft reset.

Can anyone suggest where I have gone wrong with the BT settings.

Alan

____________________________________________________
iPAQ2210/Rom upgrade 1.10
TTN3.03 GPS Driver 3.03
GPS GR-230
Checkpoint 3.2.0.0 Sprite v 3.0.1

lbendlin · Posted: Thu Sep 02, 2004 8:57 pm Post subject:

You had the BlueTooth connection hack applied before the hard reset, and need to do this again. Either read the autoconnect thread in this forum or get yourself the free BT Reg hack from the web.
_________________
Lutz

Report Map Errors here:
TomTom/TeleAtlas NAVTEQ

The_Pilgrim · Posted: Fri Sep 03, 2004 7:55 am Post subject:

Hi

I use BTTOOLS from here www.bluetooth.i-networx.de/index_e.html

regards

The pilgrm

ROBBINS · Posted: Fri Sep 03, 2004 10:34 pm Post subject:

Thanks for your help.

It works well now. I had forgotten how I set it up before. Got anything for brain fade?

Alan

_______________________________________________

iPAQ2210/Rom upgrade 1.10
TTN3.03 GPS Driver 3.03
GPS GR-230
Checkpoint 3.2.0.0 Sprite v 3.0.1

	PocketGPS
	Web