smart2go speed cam warning poi's?

bibio_ · Occasional Visitor Joined: Dec 22, 2007 Posts: 8

hi, i recently purchesed a gps box for a car head unit with a 7" screen.

it's an eonon 901. the gps box runs smart2go via a cf card.

what i would like to know is? can i add speed cam poi's and if so what type are they?

thanks bibio_

bibio_ · Occasional Visitor Joined: Dec 22, 2007 Posts: 8

just to add i made a mistake it uses an SD card ... Laughing Out Loud

Darren · Posted: Sun Jan 27, 2008 3:58 pm Post subject:

Smart2Go doesn't support custom POIs sadly so that's a no at the moment.
_________________
Darren Griffin

paul2482 · Occasional Visitor Joined: May 29, 2006 Posts: 1

i also have this unit it it running smart2go on a windows CE.net4.2. does any one know if i can change it to TOMTOM software, and could this be done via the sdcard as there is no way of getting into the windows screen.

dave4bren · Occasional Visitor Joined: Jul 16, 2006 Posts: 1

Andy_P · Posted: Sun Jun 08, 2008 1:11 pm Post subject:

Any chance of some instructions for Paul and others, Dave?

lostguy · Occasional Visitor Joined: Jun 12, 2007 Posts: 1

Here is how I made "Tomtom" work on my eonon GPS unit with "SD card Mapping" that displays on the DVD unit.You can easily do this too! First I assume you own a licenced version of "Tomtom 6" second copy and save the files currently on the SD card to a safe folder on your pc (just incase you cock-up).Now format the sd card and create a folder on it naming it exactly like this ( MobileNavigator ) open this folder and also the folder on you pc that contains your copy of tomtom6. Copy and paste the files from tomtom6 into the folder "MobileNavigator" on the sd card." Are you still with me?" OK. Now locate the tomtom.exe file (Two red hands) and rename it "MobileNavigator.exe" when you have done this close the folder finaly go to the saved original software on your pc and you will find two very small files named 1.YFAUTORUN.INF and 2.autorun.inf copy and paste these two onto the sd card.Power off the gps unit fit SD card and power on. Bingo! it works well for me.

Settings you may need in tomtom. The gps receiver now needs to be set,to do this.....

Run the software,Tap screen and select " change preferences " find the icon " show GPS status" select this.Tap configure.Scrole forward to choose "Other NMEA GPS receiver" and select Set GPS Baud rate to " 9600" and click done.Select "Com one".Click done!

And that's it!

boyo0704 · Occasional Visitor Joined: Aug 22, 2012 Posts: 1

I cannot find the YFAUTORUN.inf file?? Any help greatly appreciated.

Cheers

	PocketGPS
	Web