Fortuna clip on not on TT3 list Help!

Jlam20 · Occasional Visitor Joined: Jun 01, 2004 Posts: 1

I have recently bought a TT3 Software and Fortuna Clip on. I uses a HP4150. I installed TT3 fine, Clip on have all the light lit, (Green light got GPS). But I don't know which driver I should be choosing on TT3. I have try almost all of them, but still nothing.
My bluetooth has established on connection fine, Just cannot understand why!!?? Please Help!!

J20 Embarassed

Privateer · Posted: Tue Jun 01, 2004 10:04 pm Post subject:

Hi J20,

Using my Fortuna Clip-On Bluetooth GPS Receiver (in ST mode) with my 3970, I’ve used TT GPS Driver 3.0 with the following settings:
NMEA 0183v2 38400
Bluetooth Serial Port COM8:

As you’re using a 4150, your BT Serial Port is another COM, I think it is COM5 but you may have to experiment. If you’re using the Clip-On in XT mode then it’s different again. Thumbs Up

Regards,
_________________
Robert.
iPhone 6s Plus, iOS 14.0.1: iOS CamerAlert v2.0.7
TomTom GO Mobile iOS 2.3.1; TomTom (UK & ROI and Europe) iOS apps v1.29
Garmin Camper 770 LMT-D

sharky · Occasional Visitor Joined: May 24, 2004 Posts: 6

Hi J20

You should choose TomTom Wireless GPS. When you look in the GPS STATUS screen you can see the fix with satellites.
I had the problem that tehre was no connection because of the switch on the Clip-on was not quite in the XT-position. I switched it from ST to XT and after that it worked fine!

With regards,
Sharky

steved · Posted: Fri Jun 04, 2004 11:57 am Post subject:

I have a Fortuna Clip on and an iPAQ4150 running TT3. The iPAQ is set to NMEA 0183v2 38400 and on Bluetooth serial port COM 6. This is with the Fortuna set to ST mode. I am using Tomtom GPS driver as I also run Memory Map

Steve

steved · Posted: Fri Jun 04, 2004 11:59 am Post subject:

Whoops, that should be tomtom GPS driver 2.07....

selwonk · Occasional Visitor Joined: Jan 26, 2004 Posts: 28

I thought the ClipOn had to be connected as a SirfTrak 38400?

	PocketGPS
	Web